The four corners of the structure are finished with customisable trims.
2 large open entrances in the centre of the court to facilitate players’ quick and safe access. Folding or sliding doors can be installed depending on your requirements.
All screws are M10 A4 stainless steel with UV-resistant nylon protective washers. The expansive metallic anchors bolts are certified and homologated by the EU, measures M12/Ø16×110.
All the metal used to produce the metallic structure of the padel court is carbon steel S235JRH (EN 10219) hot galvanised; the wire mesh is pre-galvanised, and the anchor plates are hot-dip galvanised.
9 stage painting process: (1) degreasing; triple osmotic water wash; (5) nano-ceramic passivation; (6) wash again; (7) dry; (8) application of electrostatic coating in the colour of your choiceusing thermosetting polyester paint; and (9) polymerisation tunnel at 200-230ºC
Other structure integrated customisable options available. Click here for more information.
In accordance with the International Padel Federation, tempered glass (EN 12150-1:2015) must be 10 or 12mm thick, with flat polished edge and fully homologated.
Traditional system: 14 panels of 2995×1995mm plus 4 panels of 1995×1995mm, with 6 and 4 countersunk holes respectively - in total 100m2
World Padel Tour (WPT) system: 18 panels of 2995×1995mm, with 6 countersunk holes - in total 108m2
High quality EPDM rubber joints of the same width as the steel section and 5mm thick absorb shock and vibration of the glass against the steel structure.
Anchoring of tempered glass with countersunk screws A4 stainless steel and M10 metric, protected with UV-resistant nylon covers.
The perimeter of the glass is supported by the structure and rests on the anchoring plates of the structure that are raised 15MM above the ground facilitating drainage and the artificial grass finish.
Turf made from STX polyethylene fibre, a semi-concave upright monofilament reinforced with a central spine, 12 mm height and 250μm thick. 6 monofilament fibres inserted per knot and 54,600 knots per m2 (total: 655,200 threads per m2). The base is finished in polyurethane to ensure better long-term finish, with a total product weight of 2.486g/m2.
Available green, blue, clay red or purple.
MONDO STX SUPERCOURT (Official Turf of WPT)
STX SUPERCOURT is a10mm, reinforced, concave,
polyethylene monofilament, with a thickness of 250μm. 6 monofilament fibres inserted per knot and 46,200 knots per m2 (total: 554,400 threads per m2). The base is finished in polyurethane to ensure better long-term finish, with a total product weight of 2,521g/m2.
Available in blue or green
Game lines in white in the same material, joint tape, special adhesives, as well as supply and extension of silica sand of selected granulometry with rounded edges, in a total of 15 Kg/m2 (STX) and 10 kg/m2(STX SUPERCOURT) respectively.
The range of systems of MONDO artificial turf for PADEL is developed to guarantee an excellent sport and technical function. Turf carpet must be installed on a flat and if possible “rough” surface such as asphalt or unfinished concrete base. The following installation types must be avoided:
Direct glued to the base
Carpet on NWF (non-woven fabric) substrates
Carpet on hard, very smooth finished surfaces such as marble, ceramics, or concrete bases smoothed with a very fine trowel
Base - new build
The most rapid, economical, and durable solution is a rough, semi-trowelled concrete base. The coarse finish useful equal to install the turf as the metal structure.
If your concern is fast drainage, you should build a level porous base, integrating a perimeter concrete foundation to fix the steel structure. We recommend that you take measures to prevent erosion under the porous base.
Base - tennis to padel
If you have a tennis court in disuse, now you can convert it to padel taking advantage of the space without big expenses. Normally, a tennis court is installed on a soft base, which means you will have to build a perimeter concrete foundation to fix the steel structure. If the inner dimension of 20x10m is flat, this the turf can be installed directly for a quick and perfect finish.
High quality net posts and competition net comprising:
Set of net posts, made in square tube with a removable internal tightening mechanism. Reinforced net posts, hot galvanized and painted to match the rest of the structure.
Competition net made of 5mm knotless polypropylene yarn and 40x40mm mesh. Long-lasting polyester upper strip with a 6 mm plastic-coated galvanised steel cable.
Several different options of pillars and light units available.
straight lighting pillars
V-shaped lighting pillars
C-shaped lighting pillars
Colour can be customised.
150W LED lights
200W LED lights
Ball return nets
Avoid losing balls by installing protective nets on the upper section of the court